Strains and stresses
Resource Information
The concept Strains and stresses represents the subject, aboutness, idea or notion of resources found in Indiana State Library.
The Resource
Strains and stresses
Resource Information
The concept Strains and stresses represents the subject, aboutness, idea or notion of resources found in Indiana State Library.
- Label
- Strains and stresses
- Authority link
- (EG-IN)648892
100+ Items that share the Concept Strains and stresses
Context
Context of Strains and stressesSubject of
- 100-kW metal wind turbine blade basic date, loads and stress analysis
- A Study of the stress wave factor technique for the characterization of composite materials
- A circular transducer array for ultrasonic inspection of plates and sheets
- A critical examination of stresses in an elastic single lap joint
- A finite-element alternating method for two-dimensional mode-I crack configurations
- A method of viscoelastic stress analysis using elastic solutions
- A semi-micromechanic interlaminar strain analysis on curved-beam specimens : final report, April-December 31 1990 under grant NCC 2-673
- A study of fracture mechanisms in ATD roller bearing
- A theory of non-linear thermoviscoelasticity based on irreversible thermodynamics
- A total life prediction model for stress concentration sites
- Addendum to the DYCAST user's manual describing the curved, warp beam finite element
- Advanced one-dimensional optical strain measurement system--phase IV
- Aircraft structural mechanics
- Allowable bending stresses of wood for use in portable wood ladders
- An analysis of the measured values for the state of stress in the earth's crust
- An analysis of the wear behavior of SiC whisker reinforced alumnina from 25 to 1200CÌŠ
- An approximate solution for interlaminar stresses in laminated composites
- An assessment of the accuracy of orthotropic photoelasticity
- An elastic-plastic constitutive relation for transverse-isotropic three-phase earth materials
- An engineering theory of nonlinear viscoelasticity with applications
- An improved numerical method for counterformal contact stress problems
- An improved transverse shear deformation theory for laminated anisotropic plates
- An incremental finite-element determination of stresses around loaded holes in wood plates
- An interferometric strain/displacement measurement system
- An investigation of crack-tip stress field criteria for predicting cleavage-crack initiation
- Analyses of surface cracks in finite plates under tension or bending loads
- Analysis and assessment of major uncertainties associated with ship hull ultimate failure
- Approximating the stress field within the unit cell of a fabric reinforced composite using replacement elements
- Beams on elastic foundation : theory with applications in the fields of civil and mechanical engineering
- Behavior of metals under impulsive loads
- Bending properties of four-layer nail-laminated posts
- Bending stress and frequency calculations for the hearing-pack shaft
- Bilinear cyclic stress-strain parameters for types 304 and 316 stainless steel
- Buckling test of a 3-meter-diameter corrugated graphite-epoxy ring-stiffened cylinder
- Calculation of thermomechanical fatigue life based on isothermal behavior
- Collapse of experimental capsules under external pressure
- Compatibility conditions of structural mechanics for finite element analysis
- Computational methods for global/local analysis
- Concepts of fracture toughness and structural integrity
- Concrete quality assurance using accelerated strength testing
- Contact stresses for closely conforming bodies--application to cylinders and spheres
- Creep-fatigue life prediction for different heats of type 304 stainless steel by linear-damage rule, strain-range partitioning method, and damage-rate approach
- Cyclic torsion testing
- DESAP 1: : a structural design program with stress and displacement constraints
- Design of multiple-ply laminated composite tapered beams
- Determination of strain rates in ship hull structures : a feasibility study
- Development of a method for measurement of internal stress in brass tubing
- Development of a plan to obtain in-service still water bending moment information for statistical characterization
- Development of an NBS polymer gage for dynamic soil stress measurement
- Development of non-linear finite element computer code : final report to California Institute of Technology, Jet Propulsion Laboratory
- Dissipation of mechanical work and temperature rise in AS4/PEEK thermoplastic composite
- Dynamic loading on parallel shaft gears
- Effect of repeated reversals of stress on double-reinforced concrete beams
- Effect of shear stress on dynamic bulk modulus of sand
- Effects of static tensile load on the thermal expansion of Gr/PI composite material
- Elastic-plastic characterization of a cast stainless steel pipe elbow material
- Elastic-plastic finite-element analysis of thermally cycled double-edge wedge specimens
- Electro optical system to measure strains at high temperature : final report
- Elementary reinforced concrete design for students of architecture , building, and engineering
- Environmental and strain rate effects on graphite/epoxy composites
- Evaluation of nonlinear resilient moduli of unbound granular materials from accelerated traffic test data
- Evaluation of sample disturbance on soils using the concept of "reference strain"
- Evolution of allowable stresses in shear for lumber
- Examination of service and stress data of three ships for development of hull girder load criteria
- Experimental and analytical analysis of stress-strain behavior in a [90/ÌŠ0]ÌŠ2s, SiC/Ti-15-3 laminate
- Fatigue life analysis for traction drives with application to a toroidal type geometry
- Fiber-reinforced wood composites
- Finite element analysis of the 2240 MW HTGR PCRV
- Flow in a low-carbon steel at various temperatures
- Formulas for stress and strain
- Fracture control for fixed offshore structures
- Fracture toughness data for brittle materials
- Global/local stress analysis of composite panels
- Global/local stress analysis of composite structures
- Gripped-end effect in tension proof testing of dimension lumber
- Gross panel strength under combined loading
- Handbook of experimental stress analysis
- High strain rate properties of angle-ply composite laminates, Part III, final report
- High strain rate properties of off-axis composite laminates : final report, Part II
- High temperature strain measurement with a resistance strain gage
- Improving the distribution and reducing the magnitude of pavement damage
- In-situ strees project, technical report number 6 : results of hydraulic fracturing stress measurements at Jianchuan, western Yunnan Province, China
- Inelastic strain analysis of solder joint in NASA fatigue speciment : final report
- Influence of elastic properties on the stresses in bolted joints in wood
- Influence of juvenile wood content on shear parallel, compression, and tension transverse to grain strength and mode I fracture toughness for loblolly pine
- Life prediction of thermomechanical fatigue using total strain version of strainrange partitioning (SRP) : a proposal
- Light airplane crash tests at three pitch angles
- Light airplane crash tests at three rolls angles
- Linear elastic fracture mechanics primer
- Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis
- Low strain long life creep-fatigue of AF2-1DA and INCO 718
- Machine stress rating : practical concerns for lumber producers
- Materials constitutive modes for nonlinear analysis of thermally cycled structures
- Mechanical behavior of engineering materials
- Method analyzes analogue plots of paperboard stress-strain data
- Methodology for design and construction of drilled shafts in cohesive soils
- Methods for determining in situ deformation of rock masses
- Micromechanical combined stress analysis : MICSTRAN, a user manual
- Mixed finite element models for free vibrations of thin-walled beams
- Modern timber engineering
- Modfications of system for elevated temperature testing and stress-strain measurement of metal matrix composites
- Multiple-bolted joints in wood members : a literature review
- Multiple-mode nonlinear free and forced vibrations of beams using finite element method
- Nondestructive measurement of longitudinal rail stresses
- Observations of dynamic strain aging in polycrystalline NiAl
- Packer induced stresss during hydraulic well fracturing
- Predicted and measured strain responses of isotropic panels to base excitation
- Preliminary report on prototype in-situ stress testing for the Yucca Mountain project, Nevada
- Pressures, forces and moments, and shock shapes for a geometrically matched sphere-cone and hyperboloid at Mach 20.3 in helium
- Rail-wheel geometry associated with contact stress analysis
- Release of internal stress in brass tubing
- Reliability based analysis of contact problems
- Reliability considerations for the total strain range version of strainrange partitioning
- Reliability considerations for the total strain range version of strainrange partitioning
- Residual stresses in metals and metal construction
- Rigid frames
- Simple formulas for strain-energy release rates with higher order and singular finite elements
- Simplified composite micromechanics for predicting microstresses
- Slow crack growth and fracture toughness of sapphire for the International Space Station Fluids and Combustion Facility
- Solution of elastic-plastic stress analysis problems by the p-version of the finite element method
- Spartan release engagement mechanism (REM) stress and fracture analysis
- Statical hysteresis in the flexure of bars
- Statistical analysis of the rate of strain tensor in compressible homogeneous turbulence
- Strain rate and inertial effects on impact loaded single-edge notch bend specimens
- Strength and stiffness of large-gap metal-plate wood connections
- Stress concentration around circular hole in a composite material specimen representative of the X-29A forward-swept wing aircraft
- Stress distribution around resin grouted bolts
- Stress waves through projectile joints and interfaces
- Stress-strain analysis of a [0/90]2s titanium matrix laminate subjected to a generic hypersonic flight profile
- Stress-strain-time-birefrigence relations in photoelastic plastics with creep
- Stresses and strains developed by the reflection of seismic waves at a free surface
- Stresses in framed structures
- Surface cracks in a plate of finite width under tension or bending
- Technique for measuring side forces on a banked aircraft with a free-swiveling nose gear
- Tensile stress-strain behavior of graphite/epoxy laminates
- Test and analysis of Celion 300/PMR-15, graphite/polyimide bonded composite joints : summary
- The Influence of precompression on the lower-bound initiation toughness of A 533 B reactor-grade steel
- The changeable interaction between soils and pressure cells : tests and reviews at the Waterways Experiment Station | final report
- The directional stability of crack propagation
- The dynamic response of cracked hexagonal subassembly ducts
- The effect of strain rate on the toughness of ship steels
- The effect of stress on hydrogen uptake and desorption by A-286
- The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy
- The effects of strain aging on the mechanical properties of ASTM A 500 grade B structural steel tubing
- The p-version of the finite element method in incremental elasto-plastic analysis
- The structural behavior of Shasta Dam
- The surface crack problem in an orthotropic plate under bending and tension
- Theoretical relationships between moduli for soil layers beneath concrete pavements
- Thermodynamic model of creep at constant stresses and constant strain rates
- Thermomechanical deformation behavior of a dynamic strain aging alloy, Hastelloy X
- Timber engineers' handbook
- Two-dimensional surface strain measurement based on a variation of Yamaguchi's laser-speckle strain gauge
- U-groove aluminum weld strength improvement
- Underlying modal data issues for detecting damage in truss structures
- Updating of fillet weld strength parameters for commercial shipbuilding
- Use of strain-range partitioning for predicting time-dependent, strain-controlled cyclic lifetimes of uniaxial spcimens of 2 1/4 Cr-1 Mo steel, type 316 stainless steel, and hastelloy X
- User's manual for program COUNTACT (COUNTerformal contACT stress problems)
- Vibration frequencies of tapered bars with nonclassical boundary conditions
- X-ray based displacement measurement for hostile environments
Embed (Experimental)
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.in.gov/resource/L47XIMZaedw/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.in.gov/resource/L47XIMZaedw/">Strains and stresses</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.in.gov/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.in.gov/">Indiana State Library</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the Concept Strains and stresses
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.in.gov/resource/L47XIMZaedw/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.in.gov/resource/L47XIMZaedw/">Strains and stresses</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.in.gov/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.in.gov/">Indiana State Library</a></span></span></span></span></div>
