Washington, DC, National Aeronautics and Space Administration, Springfield, Va., For sale by the National Technical Information Service, 1992
Resource Information
The event Washington, DC, National Aeronautics and Space Administration, Springfield, Va., For sale by the National Technical Information Service, 1992 represents a publication, printing, distribution, issue, release or production of resources found in Indiana State Library.
The Resource
Washington, DC, National Aeronautics and Space Administration, Springfield, Va., For sale by the National Technical Information Service, 1992
Resource Information
The event Washington, DC, National Aeronautics and Space Administration, Springfield, Va., For sale by the National Technical Information Service, 1992 represents a publication, printing, distribution, issue, release or production of resources found in Indiana State Library.
- Label
- Washington, DC, National Aeronautics and Space Administration, Springfield, Va., For sale by the National Technical Information Service, 1992
- Provider date
- 1992
305 Items that share the ProviderEvent Washington, DC, National Aeronautics and Space Administration, Springfield, Va., For sale by the National Technical Information Service, 1992
Context
Context of Washington, DC, National Aeronautics and Space Administration, Springfield, Va., For sale by the National Technical Information Service, 1992Publication of
No resources found
No enriched resources found
- 10 kW power electronics for hydrogen arcjets, John A. Hamley, Luis R. Pinero, and Gerald M. Hill
- 3D rocket combustor acoustics model, Richard J. Priem and Kevin J. Breisacher
- A Fast, uncoupled, compressible, two-dimensional, unsteady boundary layer algorithm with separation for engine inlets, Robert L. Roach...[and others]
- A Free-piston Stirling engine/linear alternator controls and interaction test facility, Jeffery S. Rauch
- A compilation of lunar and Mars exploration strategies utilizing indigenous propellants, Diane L. Linne and Michael L. Meyer
- A concept for a counterrotating fan with reduced tone noise, James H. Dittmar
- A creep cavity growth model for creep-fatigue prediction of a unidirectional W/Cu composite, Yong-Suk Kim and Michael J. Verilli and Gary R. Halford
- A differential CDM model for fatigue of unidirectional metal matrix composites, S.M. Arnold and S. Kruch
- A general numerical model for wave rotor analysis, Daniel E. Paxson
- A graphical user-interface for propulsion system analysis, Brian P. Curlett and Kathleen Ryall
- A model for the scattering of high-frequency electromagnetic fields from dielectrics exhibiting thermally-activated electrical losses, Raiford E. Hann
- A new energy transfer model for turbulent free shear flow, William W.-W. Liou
- A new time scale based [kappa-epsilon] model for near wall turbulence, Z. Yang and T.H. Shih
- A parameter optimization approach to controller partitioning for integrated flight/propulsion control application, Phillip Schmidt, Sanjay Garg, and Brian Holowecky
- A parametric numerical study of mixing in a cylindrical duct, V.L. Oechsle and H.C. Mongia and J.D. Holdeman
- A study on vortex flow control on inlet distortion in the re-engined 727-100 center inlet duct using computational fluid dynamics, Bernhard H. Anderson ... [et al.], (microform)
- A survey of instabilities within centrifugal pumps and concepts for improving the flow range of pumps in rocket engines, Joseph P. Veres
- A turbulence model for iced airfoils and its validation, Jaiwon Shin, Hsun H. Chen, and Tuncer Cebeci
- Acceptance testing of the prototype electrometer for the SAMPIE flight experiment, G. Barry Hillard
- Advanced Communication Technology Satellite (ACTS) multibeam antenna analysis and experiment, Roberto J. Acosta...[and others]
- Advanced Communication Technology Satellite (ACTS) multibeam antenna technology verification experiments, Roberto J. Acosta and Jeffrey M. Larko and Alan R. Lagin
- Advanced liquid rockets, Steven J. Schneider
- Advanced nozzle and engine components test facility, Luis R. Beltran, Richard L. Del Roso, and Ruben Del Rosario
- Advanced turbine technology applications project (ATTAP), Engineering Staff of Garrett Auxiliary Power Division, a Unit of Allied-Signal Aerospace Company
- An electromechanical actuation system for an expendable launch vehicle, Linda M. Burrows and Mary Ellen Roth
- An engineering method for interactive inviscid-boundary layers, by Christopher J. Riley
- An evaluation of some alternative approaches for reducing fan tone noise, James H. Dittmar and Richard P. Woodward
- An experimental investigation of the flow in a diffusing S-duct, Steven R. Wellborn, Bruce A. Reichert, and Theodore H. Okiishi
- An improved numerical model for wave rotor design and analysis, Daniel E. Paxson and Jack Wilson
- An interactive preprocessor for the NASA engine performance program, Jeffrey J. Berton and Rpbert M. Plencner
- An optical method for determining level in two-phase cryogenic fluids, Lawrence G. Oberle and Donald H. Weikle
- An overview of in-flight plume diagnostics for rocket engines, G.C. Madzsar, R.L. Bickford, and D.B. Duncan
- An overview of silicon carbide device technology, Philip G. Neudeck and Lawrence G. Matus
- An overview of the Lewis Research Center CSTI Thermal Management program, Albert J. Juhasz
- Analysis of a generalized dual reflector antenna system using physical optics, Roberto J. Acosta and Alan R. Lagin
- Analysis of an advanced ducted propeller subsonic inlet, Chanthy Iek and Donald R. Boldman and Mounir Ibrahim
- Analysis of fault-tolerant neurocontrol architectures, T. Troudet and W. Merrill
- Analysis of iced wings, T. Cebeci ... [and others]
- Analysis of large quasistatic deformations of inelastic solids by a new stress based finite element method, Kenneth W. Reed
- Analysis of precracking parameters and fracture toughness for ceramic single-edge-precracked-beam specimens, Sung R. Choi and Abhisak Chulya and Jonathan A. Salem
- Anomalous TWTA output power spikes and their effect on a digital satellite communications system, Brian D. May and Robert J. Kerczewski and James S. Svoboda
- Application of artificial neural networks in nonlinear analysis of trusses, J. Alam and L. Berke
- Application of computational fluid dynamics to the study of vortex flow control for the management of inlet distortion, Bernhard H. Anderson and James Gibb
- Application of fiber bridging models to fatigue crack growth in unidirectional titanium matrix composites, J.G. Bakuckas, Jr. and W. S. Johnson
- Application of vector-valued rational approximations to the matrix Eigenvalue problem and connections with Krylov subspace methods, Avram Sidi
- Assessment of potential aerodynamic benefits from spanwise blowing at the wingtip, by Raymond Edward Mineck
- Asymptotic integration algorithms for first-order ODEs with application to viscoplasticity, Alan D. Freed and Minwu Yao and Kevin P. Walker
- Blazing the trailway : Nuclear Electric Propulsion and its technology program plans, Michael P. Doherty
- Breakdown of Karman vortex street due to forced convection and flow compressibility, Shu-cheng Chen
- Brush seal bristle flexure and hard-rub characteristics, Robert C. Hendricks, Julie A. Carlile, and Anita D. Liang
- Brush seal leakage performance with gaseous working fluids at static and low rotor speed condtitions, Julie A. Carlile, Robert C. Hendricks, and Dennis A. Yoder
- C-band superconductor/semiconductor hybrid field-effect transistor amplifier on a LaAlO3 substrate, J.J. Nahra ... [and others]
- CFD methods development considerations for unsteady aerodynamic analysis, John T. Batina
- CFD mixing analysis of jets injected from straight and slanted slots into confined crossflow in rectangular ducts, D.B. Bain and C.E. Smith and J.D. Holdeman
- CVD of silicon carbide on structural fibers : microstructure and composition, Lisa C. Veitch, Francis M. Teroaka and Suleyman A. Gokoglu
- Caclulation of stress intensity factors in an isotropic multicracked plate, Part II, Symbolic/numeric implementation, S.M. Arnold ... [and others]
- Calculation of stress intensity factors in an isotropic multicracked plate, Part I, Theoretical development, W.K. Binienda, S.M. Arnold, and H.Q. Tan
- Carbon-carbon materials and composites, Edited by John D. Buckley, D.D. Edie
- Central difference TVD and TVB schemes for time dependent and steady state problems, P. Jorgenson and E. Turkel
- Ceramic component reliability with the restructured NASA/Cares Computer Program, Lynn M. Powers and Alois Starlinger and John P. Gyekenyesi
- Ceramic composites--enabling aerospace materials, S.R. Levine
- Chemical stability of high-temperature superconductors, Narottam P. Bansal
- Chronopotentiometry of refractory metals, actinides and oxyanions in molten salts : a review, Narottam P. Bansal
- Collapse analysis of a waffle plate strongback for Space Station Freedom, Frank F. Monasa and Joseph M. Roche
- Color image processing and object tracking workstation, Robert B. Klimek and Michael J. Paulick
- Combustion-wave ignition for rocket engines, Larry C. Liou
- Comments on "Kinetic Study on the Hexacelsian-Celsian Phase Transformation", Narottam P. Bansal and Charles H. Drummond, III
- Comparative study of turbulence models in predicting hypersonic inlet flows, Kamlesh Kapoor, Bernhard H. Anderson, and Robert J. Shaw
- Comparison of GLIMPS and HFAST Stirling engine code predictions with experimental data, Steven M. Geng and Roy C. Tew
- Comparison of all-electric secondary power systems for civil subsonic transports, David D. Renz
- Comparison of truncation error of finite-difference and finite-volume formulations of convection terms, B.P. Leonard
- Computational simulation of intermingled-fiber hybrid composite behavior, Subodh K. Mital and Christos C. Chamis
- Computational simulation of matrix micro-slip bands in SiC/Ti composite, S.K. Mital ...[and others]
- Computational simulation of probablistic lifetime strength for aerospace materials subjected to high temperature, mechanical fatigue, creep and thermal fatigue, Lola Boyce, Callie C. Bast, and Greg A. Trimble
- Computational simulation of surface waviness in graphite/epoxy woven composites due to initial curing, Jose G. Sanfeliz, Pappu L.N. Murthy, and Christos C. Chamis
- Computer aided design and manufacturing of composite propfan blades for a cruise missle wind tunnel model, Scott A. Thorp and Kevin M. Downey
- Concurrent optimization of airframe and engine design parameters, Thomas M. Lavelle, Robert M. Plencner, and Jonathan A. Seidel
- Conductor-backed coplanar waveguide resonators of Y-Ba-Cu-O and Tl-Ba-Ca-Cu-O on LaAlO3, F.A. Miranda ... [and others]
- Coupled multi-disciplinary simulation of composite engine structures in propulsion environment, Christos C. Chamis and Surendra N. Singhal
- Coupled structural/thermal/electromagnetic analysis/tailoring of graded composite structures : first annual status report, R.L. McKnight ... [and others]
- Coupled structural/thermal/electromagnetic analysis/tailoring of graded composite structures : second annual status report, R.L. McKnight, H. Huang, and M. Hartle
- Coupled structural/thermal/electromagnetic analysis/tailoring of graded composite structures : third annual status report, R.L. McKnight ... [and others]
- Cryogenic transfer options for exploration missions, David J. Chato
- Damage mechanisms in bithermal and thermomechanical fatigue of Haynes 188, Sreeramesh Kalluri and Gary R. Halford
- Damping and scattering of electromagnetic waves by small ferrite spheres suspended in an insulator, Gerald W. Englert, (microform)
- Data distribution satellite, Grady H. Stevens
- Debris/ice/TPS assessment and integrated photographic analysis for shuttle mission STS-46, Gregory N. Katnik, Scott A. Higginbotham, J. Bradley Davis
- Debris/ice/TPS assessment and integrated photographic analysis for shuttle mission STS-47, Gregory N. Katnik, Scott A. Higginbotham, J. Bradley Davis
- Debris/ice/TPS assessment and integrated photographic analysis for shuttle mission STS-50, Gregory N. Katnik, Scott A. Higginbotham, J. Bradley Davis
- Debris/ice/TPS assessment and integrated photographic analysis for shuttle mission STS-52, Gregory N. Katnik, Scott A. Higginbotham, J. Bradley Davis
- Demonstrated survivability of a high temperature optical fiber cable on a 1500 pound thrust chamber, Amy L. Sovie, (microform)
- Dependence of hydrogen arcjet operation on electrode geometry, Eric J. Pencil ... [and others]
- Deposition of adherent Ag-Ti duplex films on ceramics in a multiple-cathode sputter deposition system, Frank S. Honecy
- Derated ion thruster design issues, Michael J. Patterson and Vincent K. Rawlin
- Description of a pressure measurement technique for obtaining surface static pressures of a radial turbine, L. Danielle DiCicco and Brent C. Nowlin and Lizet Tirres
- Description of the SSF PMAD DC testbed control system data acquisition function, Anastacio N. Baez, Michael Mackin, and Theodore Wright
- Design issues for lunar in situ aluminum/oxygen propellant rocket engines, Michael L. Meyer
- Design of a high-temperature experiment for evaluating advanced structural materials, Theodore T. Mockler ... [and others]
- Design of small Stirling dynamic isotope power system for robotic space missions, D.J. Bents ... [and others]
- Determination of parameters of a new method for predicting alloy properties, Guillermo Bozzolo and John Ferrante
- Development and flight history of SERT II spacecraft, William R. Kerslake and Louis R. Ignaczak
- Development of advanced seals for space propulsion turbomachinery, R.C. Hendricks
- Development of an algebraic turbulence model for analysis of propulsion flows, N.J. Georgiadis and J.E. Drummond and B.P. Leonard
- Development of braided rope seals for hypersonic engine applications : flow modeling, Rajakkannu Mutharasan ... [and others]
- Direct Broadcast Satellite-Radio Program, James E. Hollansworth
- Dynamic analysis of a pre-and-post ice impacted blade, G.H. Abumeri ... [et al.], (microform)
- EMPT based stability analysis of space station electric power system in a test bed environment, Narayan V. Dravid, Thomas J. Kacpura, and Andrew M. O'Connor
- EOS data and information system (EOSDIS)
- Effect of InAlAs window layer on efficiency of indium phosphide solar cells, Raj K. Jain and Geoffrey A. Landis
- Effect of heat treatment on stiffness damping of SiC/Ti-15-3, Joseph E. Grady and Bradley A. Lerch
- Effect of model selection on combustor performance and stability predictions using ROCCID, James E. Giuliani and Mark D. Klem
- Effect of vaporization on cryogenic spray dropsize measurement, Robert D. Ingebo
- Effects of a noncoplanar biphenyldiamine on the processing and properties of additions polyimides, Kathy C. Chuang and Raymond D. Vannucci and Brad W. Moore
- Effects of anode material on arcjet performance, John M. Sankovic and Frank M. Curran and C. A. Larson
- Effects of fiber and interfacial layer architectures on the thermoplastic response of metal matrix composites, Marek-Jerzy Pindera and Alan D. Freed and Steven M. Arnold
- Effects of turbine cooling assumptions on performance and sizing of high-speed civil transport, Paul F. Senick
- Electrical properties of Teflon and ceramic capicitors at high temperatures, A.N. Hammoud ... [and others]
- Energy loss analysis of an integrated space power distribution system, M. Davis Kankam and P.F. Ribeiro
- Engine panel seals for hypersonic engine applications : high temperature leakage assessments and flow modelling, Bruce M. Steinetz ... [et al.], (microform)
- Eno-Oshers schemes for Euler equations, Jacobus J. Van Der Vegt
- Environmental effects on friction and wear of diamond and diamondlike carbon coatings, Kazuhisa Miyoshi, Richard L.C. Wu, and Alan Garscadden
- Evaluation and application of the Baldwin-Lomax turbulence model in two-dimensional, compressible boundary layers, Barbara Sakowski ... [and others]
- Evaluation of an innovative high temperature ceramic wafer seal for hypersonic engine applications, Bruce M. Steinetz
- Evaluation of high temperature capacitor dielectrics, Ahmad N. Hammoud and Ira T. Myers, (microform)
- Experimental and computational ice shapes and resulting drag increase for a NACA 0012 airfoil, Jaiwon Shin and Thomas H. Bond
- Experimental investigation of cyclic thermomechanical deformation in torsion, Michael G. Castelli, Charles E. Bakis, and John R. Ellis
- Experimental performance of three design factors for ventral nozzles for SSTOVL aircraft, Barbara S. Esker and Gail P. Perusek
- Experimental study of cross-stream mixing in a rectangular duct, D.S. Liscinsky ... [and others]
- Experiments and analysis concerning the use of external burning to reduce aerospace vehicle transonic drag, Charles J. Trefny
- Far-field noise and internal modes from a ducted propeller at simulated aircraft takeoff conditions, Richard P. Woodward ... [et al.], (microform)
- Findings of a review of spacecraft fire safety needs, G.E. Apostolakis ... [and others]
- Flow quality studies of the NASA Lewis Research Center 8- by 6-foot supersonic/9- by 15-foot low speed wind tunnel, E. Allen Arrington and Mark T. Pickett, (microform)
- Full Navier-Stokes analysis of a two-dimensional mixer/ejector nozzle for noise suppression, James R. DeBonis
- Graphite intercalation compound with iodine as the major intercalant, Ching-cheh Hung and Donald Kucera
- Heat transfer in oscillating flows with sudden change in cross section, Mounir Ibrahim ... [and others]
- Helium bubble flow visualization of the spanwise separation on a NACA 0012 with simulated glaze ice, M. Kerho and M. Bragg, and J. Shin, (microform)
- High temperature dielectric properties of Apical, Kapton, Peek, Teflon AF, and Upilex polymers, A.N. Hammoud
- High temperature dynamic engine seal technology development, Bruce M. Steinetz ... [and others]
- High-performance packaging for monolithic microwave and millimeter-wave integrated circuits, K.A. Shalkhauser and K. Li and Y.C. Shih
- Hydrogen no-vent fill testing in a 5 cubic foot (142) liter tank using spray nozzle and spray bar liquid injection, Matthew E. Moran and Ted W. Nyland
- ISDN at NASA Lewis Research Center, Catherine Murphy Bakes and Fredric Goldberg and Steven W. Eubanks
- Improving the low temperature ductility of NiAl, Sumit Guha
- Institute for Computational Mechanics in Propulsion (ICOMP) : sixth annual report--1991, compiled and edited by Dr. Charles E. Feiler
- Integrated health monitoring and controls for rocket engines, W.C. Merrill, J.L. Musgrave, and T.H. Guo
- Integrity testing of brush seal in shroud ring of T-700 engine, Robert C. Hendricks ... [and others]
- Intensified array camera imaging of solid surface combustion aboard the NASA Learjet, Karen J. Weiland
- Interface of an uncoupled boundary layer algorithm with an inviscid core flow algorithm for unsteady supersonic engine inlets, Douglas Darling and Barbara Sakowski
- Interference susceptibility measurements for an MSK satellite communication link, Robert J. Kerczewski and Gene Fujikawa
- Internal reversing flow in a tailpipe offtake configuration for SSTOVL aircraft, Jack G. McArdle and Barbara S. Esker and James A. Rhodes
- Inverse kinematics problem in robotics using neural networks, Benjamin B. Choi and Charles Lawrence
- Investigation of advanced counterrotation blade configuration concepts for high speed turboprop systems, Task III, Advanced fan section grid generator, final report and computer program user's manual, Andrew J. Crook and Robert A. Delaney
- Investigation of advanced counterrotation blade configuration concepts for high speed turboprop systems, Task IV, Advanced fan section aerodynamic analysis final report, Andrew J. Crook and Robert A. Delaney
- Jet mixing into a heated cross flow in a cylindrical duct : influence of geometry and flow variations, M.S. Hatch ... [and others]
- Kolmogorov behavior of near-wall turbulence and its application in turbulence modeling, Tsan-Hsing Shih and John L. Lumley
- Krypton ion thruster performance, Michael J. Patterson and George J. Williams
- Large transient fault current test of an electrical roll ring, Edward J. Yenni and Arthur G. Birchenough
- Lattice parameters of fcc binary alloys using a new semiempirical method, Guillermo Bozzolo and John Ferrante
- Least Reliable Bits Coding (LRBC) for high data rate satellite communications, Mark Vanderaar and Paul Wagner and James Budinger
- Leveling coatings for reducing the atomic oxygen defect density in protected graphite fiber epoxy composites, D. A. Jaworske ... [and others]
- Life extending control for rocket engines, C. F. Lorenzo ... [and others]
- Liquid hydrogen mass flow through a multiple orifice Joule-Thomson device, S. Stephen Papell and Ted W. Nyland and Naseem H. Saiyed
- Liquid lubricants for advanced aircraft engines, William R. Loomis and Robert L. Fusaro
- Liquid lubrication for space applications, Robert L. Fusaro and Michael M. Khonsari
- Load converter interactions with the secondary system in the Space Station Freedom power management and distribution DC test bed, Ramon C. Lebron
- Long time behavior of unsteady flow computations, S.I. Hariharan
- Low Isp derated ion thruster operation, Michael J. Patterson
- Low power arcjet test facility impacts, W. Earl Morren and Paul J. Lichon
- Low thrust chemical rocket technology, Steven J. Schneider
- Lunar and Martian environmetal interactions with nuclear power system radiators, Marla E. Perez-Davis and James R. Gaier and Cynthia M. Katzan
- Metabolic energy requirements for space flight, Helen W. Lane, Ph.D
- Metallized gelled monopropellants, Erin G. Nieder ... [and others]
- Microfracture in high temperature metal matrix laminates, Subodh K. Mital, Christos C. Chamis and Pascal K. Gotsis
- Microgravity combustion science : progress, plans, and opportunities, the Microgravity Combustion Group
- Microwave beam power transmission at an arbitrary range, L.R. Pinero, J.L. Christian, Jr., and R.J. Acosta
- Miniature high temperature plug-type heat flux guages, Curt H. Liebert
- Modal element method for scattering of sound by absorbing bodies, Kenneth J. Baumeister and Kevin L. Kreider
- Modal test/analysis correlation of space station using nonlinear sensitivity, Viney K. Gupta ... [and others]
- Monolithic and mechanical multijunction space solar cells, Raj K. Jain and Dennis J. Flood
- Multi-megawatt inverter/converter technology for space power applications, Ira T. Myers ... [and others]
- Multichannel demultiplexer/demodulator technologies for future satellite communication systems, William D. Ivancic ... [et al.], (microform)
- Multimegawatt MPD thruster design considerations, Roger M. Myers and James E. Parkes and Maris A. Mantenieks
- Multiwavelength pyrometry for nongray bodies, Daniel Ng
- Multiwavelength pyrometry for nongray surfaces in the presence of interfering radiation, Daniel Ng
- NASA Lewis Stirling SPRE testing and analysis with reduced number of cooler tubes, Wayne A. Wong
- NASA Lewis steady-state heat pipe code users manual, Leonard K. Tower, Karl W. Baker, and Timothy S. Marks
- NASA STI Program Coordinating Council, ninth meeting, October 28, 1992 : TQM
- NASA Space Human Factors Program 1992
- NASA's nuclear electric propulsion technology project, James R. Stone and James S. Sovey
- NASA/DOE/DOD nuclear propulsion technology planning : summary of FY 1991 interagency panel results, John S. Clark ... [and others]
- NIST torsion oscillator viscometer response : performance on the LeRC active vibration isolation platform, Robert F. Berg and Carlos M. Grodsinsky
- Navier-Stokes analysis analysis and experimental data comparison of compressible flow in a diffusing S-duct, Gary J. Harloff, Bruce A. Reichert, and Steven R. Wellborn
- Navier-Stokes turbine heat transfer predictions using two-equation turbulence, Ali A. Ameri and Andrea Arnone
- Neutron, gamma ray, and temperature effects on the electrical characteristics of thyristors, A.J. Frasca and G.E. Schwarze
- Nondestructive evaluation of ceramic and metal matrix composites for NASA's HITEMP and enabling propulsion materials program, Edward R. Generazio
- Nuclear Electric Propulsion Technology panel findings and recommendations, Michael P. Doherty
- Nuclear electric propulsion : an integral part of NASA's nuclear propulsion project, James R. Stone
- Nuclear thermal propulsion transportation systems for Lunar/Mars exploration, John S. Clark ... [and others]
- Numerical calibration of the Stable Poisson Loaded specimen, Louis J. Ghosn, Anothony M. Calomino, and Dave N. Brewer
- Numerical solution of a three-dimensional cubic cavity flow by using the Boltzmann equation, Danny P. Hwang
- Numerical study of mixing of two fluids under low gravity, Walter M.B. Duval
- On an origin of numerical diffusion : violation of invariance under space-time inversion, Sin-Chung Chang
- On bilinearity of Manson-Coffin low-cycle-fatigue relationship, V.M. Radhakrishnan
- On the mechanism of turbulence suppression in free shear flows under acoustic excitation, K.M.B.Q. Zaman and E.J. Rice
- Overview and evolution of the LeRC PMAD DC testbed, James F. Soeder and Robert J. Frye
- Overview of NASA supported Stirling thermodynamic loss research, Roy C. Tew and Steven M. Geng
- Overview of high performance aircraft propulsion research, Thomas J. Biesiadny
- PC graphics generation and management tool for real-time applications, Long V. Truong
- Parameterization of solar cells, J. Appelbaum, A. Chait, and D. Thompson
- Payload isolation and stabilization by a Suspended Experiment Mount (SEM), Dr. Wayne L. Bailey ... [and others]
- Phase transformations in SrAl2Si2O8 glass, Charles H. Drummond, III and Narottam P. Bansal
- Photovoltaic array for Martian surface power, J. Appelbaum and G.A. Landis
- Power management and distribution considerations for a lunar base, Barbara H. Kenny and Anthony S. Coleman
- Power system monitoring and source control of the Space Station Freedom DC Power System Testbed, Greg L. Kimnach and Anastacio N. Baez
- Prediction of ice accretion on a swept NACA 0012 airfoil and and comparisons of flight test results, Andrew L. Reehorst
- Predictive onboard flow control for packet switcing satellites, Eric A. Bobinsky
- Preliminary characterization of a water vaporizer for resistojet applications, W. Earl Morren
- Preliminary dynamic tests of a flight-type ejector, Colin K. Drummond
- Preliminary evaluation of adhesion strength measurement devices for ceramic/titanium matrix composite bonds, Bobby Pohlchuck and Mary V. Zeller
- Pressure wave propagation studies for oscillating cascades, Dennis L. Huff
- Probabilistic assessment of space trusses subjected to combined mechanical and thermal loads, Shantaram S. Pai and Christos C. Chamis
- Probabilistic evaluation of fuselage-type compsite structures, Michael C. Shiao and Christos C. Chamis
- Program ELM : a tool for rapid thermal-hydraulic analysis of solid-core nuclear rocket fuel elements, James T. Walton
- Progress toward a tungsten alloy wire/high temperature alloy composite turbine blade, F.J. Ritzert and R.L. Dreshfield
- Progress towards understanding and predicting convection heat transfer in the turbine gas path, Robert J. Simoneau and Frederick F. Simon
- Progress update of NASA's Free-Piston Stirling Space Power Converter Technology Project, James E. Dudenhofer and Jerry M. Winter and Donald Alger
- Progressive fracture of polymer matrix composite structures : a new approach, C.C. Chamis and P.L.N. Murthy and L. Minnetyan
- Properties data for opening the Galileo's partially unfurled main antenna, Kazuhisa Miyoshi and Stephen V. Pepper
- Propulsion systems using in situ propellants for a Mars ascent vehicle, Mary F. Wadel and Elizabeth A. Roncace
- RF modulated fiber optic sensing systems and their applications, Grigory Adamovsky and John G. Eustace
- Radial turbine cooling, Richard J. Roelke
- Rational approximations from power series of vector-valued meromorphic functions, Avram Sidi
- Real-time demonstration hardware for enhanced DPCM video compression algorithm, Thomas P. Bizon and Wayne A. Whyte, Jr. and Vincent R. Marcopoli
- Relative sliding durability of candidate high temperature fiber seal materials, Christopher Dellacorte and Bruce M. Steinetz
- Reliability analysis of laminated CMC components through shell subelement techniques, Alois Starlinger, Stephen F. Duffy, and John P. Gyekenyesi
- Reliability analysis of structural ceramic components using a three-parameter Weibull distribution, Stephen F. Duffy and Lynn M. Powers, Alois Starlinger
- Renormalization group analysis of the Reynolds stress transport equation, R. Rubinstein and J.M. Barton
- Research and development of optical measurement techniques for aerospace propulsion research : a NASA Lewis Research Center perspective, Daniel J. Lesco
- Resonant mode controllers for launch vehicle applications, Ken E. Schreiner and Mary Ellen Roth
- Results of a low power ice protection system test and a new method of imaging data analysis, Jaiwon Shin and Thomas H. Bondand Geert A. Mesander
- Results of an icing test on a NACA 0012 airfoil in the NASA Lewis Icing Research Tunnel, Jaiwon Shin and Thomas H. Bond
- Review of the physical and mechanical properties and potential applications of the B2 compound NiAl, Ronald D. Noebe, Randy R. Bowman, and Michael V. Nathal
- Rocket engine diagnostics using qualitative modeling techniques, Michael Binder ... [and others]
- Rocket plume flowfield characterization using Rayleigh scattering, Frank J. Zupanc and Jonathan M. Weiss
- Root damage analysis of aircraft engine blade subject to ice impact, E.S. Reddy ... [and others]
- SP-100 reactor with Brayton conversion for lunar surface applications, Lee S. Mason ... [and others]
- Safety considerations in testing a fuel-rich aeropropulsion gas generator, R. James Rollbuhler and David D. Hulligan
- Scaling of 100 kW class applied-field MPD thrusters, Roger M. Myers
- Science and application payloads in the 90's, Carmine E. De Sanctis
- Screech noise source structure of a supersonic rectangular jet, E.J. Rice and R. Taghavi
- Second-order closure modeling of turbulent buoyant wall plumes, Gang Zhu and Ming-Chia Lai and Tsan-Hsing Shih
- Self-pressurization of a flightweight liquid hydrogen tank : effects of fill level at low wall heat flux, N.T. Van Dresar and C.S. Lin and M.M. Hasan
- Self-pressurization of a spherical liquid hydrogen storage tank in a microgravity environment, C.S. Lin and M.M. Hasan
- Semi-empirical model for prediction of unsteady forces on an airfoil with application to flutter, Aparjit J. Mahajan and Krishna Rao V. Kaza
- Sinterless contacts to shallow junction InP solar cells, V.G. Weizer, N.S. Fatemi, and A.L. Korenyi-Both
- Small experiments for maturation of orbital cryogenic transfer technologies, David J. Chato and William J. Taylor
- Solar array module plasma interaction experiment (SAMPIE) : technical requirements document, G. Barry Hillard and Dale C. Ferguson
- Solar dynamic models for Space Station Freedom : the relationship between fine-pointing control and thermal loading of the apeture plate, Roger D. Quinn and Thomas W. Kerslake
- Solar radiation on a catenary collector, M. Crutchik and J. Appelbaum
- Space Station Freedom media handbook
- Space acceleration measurement system triaxial sensor head error budget, John E. Thomas, Rex B. Peters, and Brian D. Finley
- Status and future direction of InP solar cell research, R.K. Jain and I. Weinberg
- Stochastic sensitivity measure for mistuned high-performance turbines, Durbha V. Murthy and Christophe Pierre
- Structural analysis of low-speed composite propfan blades for the LRCSW wind tunnel model, Michael A. Ernst
- Structural optimization of large structural systems by optimality criteria methods, Laszlo Berke
- Structural optimization of thin shells using finite element method, Pascal K. Gotsis
- Studies on the reactive melt infiltration of silicon and silicon-molybdenum alloys in porous carbon, M. Singh and D.R. Behrendt
- Subband coding for image data archiving, D. Glover and S.C. Kwatra
- Summary of the NASA Lewis component technology program for Stirling power converters, Lanny G. Thieme and Diane M. Swec
- Supersonic investigation of two-dimensional hypersonic exhaust nozzles, Jeanne D. Carboni ... [and others]
- Supersonic jet mixing enhancement by 'delta-tabs', K.B.M.Q. Zaman and M.F. Reeder and M. Samimy
- Synergistic effects of ultraviolet radiation, thermal cycling and atomic oxygen on altered and coated Kapton surfaces, Joyce A. Dever and Eric J. Bruckner and Elvin Rodriguez
- System model development for nuclear thermal propulsion, James T. Walton ... [and others]
- Tailored metal matrix composites for high-temperature performance, M.R. Morel, D.A. Saravanos, and C.C. Chamis
- Temperature-dependent reflectivity of silicon carbide, Daniel Ng
- Tensile strain measurements of ceramic fibers using scanning laser acoustic microscopy, Renee M. Kent and Alex Vary
- Test and control computer user's guide for a Digital Beam Former Test System, Robert E. Alexovich and Paul G. Mallasch
- The ACTS multibeam antenna, Frank A. Regler
- The Evolutionary development of high specific impulse electric thruster technology, James S. Sovey ...[and others]
- The First United States Microgravity Library : researching applications for the future
- The High Resolution Accelerometer Package (HiRAP) flight experiment summary for the first 10 flights, Robert C. Blanchard, K.T. Larman, and M. Barrett
- The NASA CSTI High Capacity Power Project, J. Winter ... [and others]
- The achievement of low contact resistance to indium phosphide : the roles of Ni, Au, Ge, and combinations thereof, Navid S. Fatemi and Victor G. Weizer
- The aerodynamic effect of fillet radius in a low speed compressor cascade, Brian P. Curlett
- The cyclic oxidation resistance at 12000 of β-NiAl, FeAl, and CoAl alloys with selected third element additions, C.A. Barrett and R.H. Titran
- The effect of contact stresses in four-point bend testing of graphite/epoxy and graphite/PMR-15 composite beams, Wieslaw K. Binienda, Gary D. Roberts, and Demetrios S. Papadopoulos
- The engine design engine : a clustered computer platform for the aerodynamic inverse design and analysis of a full engine, J. Sanz, K. Pischel, and D. Hubler
- The flip-flop nozzle extended to supersonic flows, Ganesh Raman, Michael Hailye, and Edward J. Rice
- The light of a new age, remarks by NASA administrator Daniel S. Goldin
- Thermochemical energy storage for a lunar base, Marla E. Perez-Davis, Barbara I. McKissock and Frank DiFilippo
- Thermomechanical deformation behavior of a dynamic strain aging alloy, Hastelloy X, Michael G. Castelli, Robert V. Miner, and David N. Robinson
- Thermomechanical fatigue behavior of SiC/Ti-24Al-11Nb in air and argon environment, Paul A. Bartolotta and Michael mJ. Verrilli
- Thermostructural tailoring of fiber composite structures, Thomas H. Acquaviva
- Towards the development of micromechanics equations for ceramic matrix composites via fiber substructuring, P.L.N. Murthy and C.C. Chamis
- Transverse flexural tests as a tool for assessing damage to PMR-15 composites from isothermal aging in air at elevated temperatures, Kenneth J. Bowles
- Tribological and mechanical comparison of sintered and hipped PM212 : high temperature self-lubricating composites, Christopher DellaCorte and Harold E. Sliney and Michael S. Bogdanski
- Tribological evaluation of an Al2O3SiO2 ceramic fiber candidate for high temperature sliding seals, Christopher DellaCorte and Bruce Steinetz
- Turbomachinery CFD on parallel computers, Richard A. Blech ... [and others]
- Turbulent fluid motion IV : averages, Reynolds decomposition, and the closure problem, Robert G. Deissler
- Turbulent heat flux measurements in a transitional boundary layer, K.H. Sohn, K.B.M.Q. Zaman, and E. Reshotko
- Unified viscoplastic behavior of metal matrix composites, S.M. Arnold, D.N. Robinson, and P.A. Bartolotta
- Upper bounds for convergence rates of vector extrapolation methods on linear systems with initial iterations, Avram Sidi and Yair Shapira
- Use of an approximate similarity principle for the thermal scaling of a full-scale thrust augmenting ejector, Wendy S. Barankiewicz and Gail P. Perusek, and Mounir B. Ibrahim
- User manual for NASA Lewis 10- by 10-Foot Supersonic Wind Tunnel, Ronald H. Soeder
- User's guide to the Reliabilty Estimation System Testbed (REST), David M. Nicol, Daniel L. Palumbo, Adam Rifkin
- Validation test of advanced technology for IPV nickel-hydrogen flight cells--update, John J. Smithrick and Stephen W. Hall
Embed
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.in.gov/resource/6W2vEXI940Q/" typeof="PublicationEvent http://bibfra.me/vocab/lite/ProviderEvent"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.in.gov/resource/6W2vEXI940Q/">Washington, DC, National Aeronautics and Space Administration, Springfield, Va., For sale by the National Technical Information Service, 1992</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.in.gov/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.in.gov/">Indiana State Library</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the ProviderEvent Washington, DC, National Aeronautics and Space Administration, Springfield, Va., For sale by the National Technical Information Service, 1992
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.in.gov/resource/6W2vEXI940Q/" typeof="PublicationEvent http://bibfra.me/vocab/lite/ProviderEvent"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.in.gov/resource/6W2vEXI940Q/">Washington, DC, National Aeronautics and Space Administration, Springfield, Va., For sale by the National Technical Information Service, 1992</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.in.gov/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.in.gov/">Indiana State Library</a></span></span></span></span></div>