United States, Bureau of Standards
Resource Information
The organization United States, Bureau of Standards represents an institution, an association, or corporate body that is associated with resources found in Indiana State Library.
The Resource
United States, Bureau of Standards
Resource Information
The organization United States, Bureau of Standards represents an institution, an association, or corporate body that is associated with resources found in Indiana State Library.
- Label
- United States, Bureau of Standards
- Authority link
- (EG-IN)831182
- Subordinate unit
- Bureau of Standards
100+ Items by the Organization United States, Bureau of Standards
Context
Context of United States, Bureau of StandardsCreator of
Contributor of
- "Center of gravity" and "effective wave length" of transmission of pyrometer color screens, and the extrapolation of the high temperature scale
- A camera for studying projectiles in flight
- A comparison of the deoxidation effects of titanium and silicon on the properties of rail steel
- A comparison of the heat insulating properties of some of the materials used in fire-resistive construction
- A critical study of the Ledebur method for determining oxygen in iron and steel
- A flow calorimeter for specific heats of gases
- A fundamental basis for measurements of length
- A measure of the color characteristics of white papers
- A method for the accurate measurement of short-time intervals
- A method of determining the dew points of fuel-air mixtures
- A method of studying electrode potentials and polarization
- A new electrical telemeter
- A new interference apparatus for testing haemacytometers
- A new interferential dilatometer
- A nonintermittent sensitometer (time-scale exposure machine) with clock-controlled motor drive
- A photometric method for measuring the hiding power of paints
- A picnometer for the determination of density of molasses
- A piezo-electric method for the instantaneous measurement of high pressures
- A portable radio direction finder for 90 to 7,700 kilocycles
- A preliminary study of tearing instruments and tearing test methods for paper testing
- A quantitative study of regeneration by inductive feed back
- A radiometric investigation of the germicidal action of ultra-violet radiation
- A recording chronograph for the inverse rate method of thermal analysis
- A review of the literature relating to the critical constants of various gases
- A review of the literature relating to the normal densities of gases
- A special camera for photographing cylindrical surfaces
- A specific gravity balance for gases
- A statistical study of conditions affecting the distance range of radio telephone broadcasting stations
- A study of commercial dial micrometers for measuring the thickness of paper
- A study of problems relating to the maintenance of interior marble
- A study of radio signal fading
- A study of silk waste used for cartridge-bag cloth : with an appendix on the general classification of waste silk
- A study of test methods for the purpose of developing standard specifications for paper bags for cement and lime
- A study of the seasonal variation of radio-frequency phase difference of laminated phenolic insulating materials
- A unicontrol high-frequency radio direction finder
- A variable self and mutual inductor
- Aberrations of long focus anastigmatic photographic objectives
- Absolute measurement of capacitance by Maxwell's method
- Absorption spectra of iron, cobalt and nickel
- Action of charred paper on the photographic plate and a method of deciphering charred records
- Action of the salts in alkali water and sea water on cements
- Aeronautic instruments
- Air-hardening rivet steels
- Airplane antenna constants
- Alternating current distribution in cylindrical conductors
- Alternating-current resistance and inductance of single-layer coils
- An air analyzer for determining the fineness of cement
- An apparatus for measuring the relative wear of sole leathers, and the results obtained with leather from different parts of a hide
- An electron tube amplifier using 60-cycle alternating current to supply power for the filaments and plates
- An experimental study of the Fahy permeameter
- An improved method for preparing raffinose
- An interlaboratory photometric comparison of glass screens and of tungsten lamps, involving color differences
- An investigation of fusible tin boiler plugs
- An investigation of oxyacetylene welding and cutting blowpipes, with especial reference to their design, safety, and economy in operation
- An investigation of the laws of plastic flow
- Application of dicyanin to the photography of stellar spectra
- Application of the interferometer to gas analysis
- Application of the interferometer to measurements of the thermal dilatation of ceramic materials
- Behavior of wrought manganese bronze exposed to corrosion while under tensile stress
- Bureau circular
- Bureau of Standards : supplementing exhibit of the Bureau of Standards at the Brazil Centennial Exposition, Rio de Janeiro, Brazil, 1922-1923
- Cadmium electrode for storage-battery testing
- Calculation of Planck's constant C2
- Calibration and adjustment of the Schopper folding tester
- Cause and prevention of kiln and dry-house scum and of efflorescence on face-brick walls
- Causes of some accidents from gas appliances : an investigation conducted in Baltimore in cooperation with the Baltimore Health Department, United States Public Health Service, and the Consolidated Gas Electric Light & Power Co., of Baltimore, Md.
- Cement-lime mortars
- Cementing qualities of the calcium aluminates
- Characteristic soft X-rays from arcs in gases and vapors
- Circular of the Bureau of Standards
- Cleaning of fur and leather garments
- Coking of Illinois coal in Koppers type oven. : an operating test at the St. Paul plant of Minnesota By-product Coke Co., conducted jointly by National Bureau of Standards and Bureau of Mines
- Color in the sugar industry ...
- Colored wall plaster
- Comparative cold-rolling tests of open-hearth steel strip (deep-drawing stock) and electrolytic-iron strip
- Comparative durability of chrome and vegetable tanned sole leathers
- Comparative slow bend and impact notched bar tests on some metals
- Comparative tests of six-inch cast-iron pipes of American and French manufacture
- Comparative tests of stitches and seams
- Comparative wearing qualities of pima and ordinary cotton used in mail bags
- Comparison of American, British, and German standards for metal fits
- Comparison of five methods used to measure hardness
- Composition, purification, and certain constants of ammonia
- Compressive strength of column web plates and wide web columns
- Compressive strength of large brick piers
- Condensation of water from engine exhaust for airship ballasting
- Conservation of tin in bearing metals, bronzes, and solders
- Constants of spectral radiation of a uniformly heated inclosure or so-called black body, II
- Constants of the quartz-wedge saccharimeter and the specific rotation of sucrose
- Constitution and microstructure of porcelain
- Correlation of the magnetic and mechanical properties of steel
- Creep in five steels at different temperatures
- Creep in five steels at different temperatures
- Cutting fluids
- Data on electric railway track leakage
- Decarburization of ferrochromium by hydrogen
- Dehydration of clays
- Density and electrical properties of the system, rubber-sulphur
- Density and thermal expansion of American Petroleum Oils
- Density of hot-rolled and heat-treated carbon steels
- Design of atmospheric gas burners
- Detection of resin in drier
- Determination of aluminum as oxide / by William Blum
- Determination of ammonia in illuminating gas
- Determination of carbon in steel and iron by the barium carbonate titration method
- Determination of carbon in steels and irons by direct combustion in oxygen at high temperature
- Determination of cellulose in rubber goods
- Determination of oil and resin in varnish
- Determination of phosphorus in steels containing vanadium
- Determination of sulphur in illuminating gas
- Determination of the output characteristics of electron tube generators
- Determination of volatile thinner in oil varnish
- Determination of weight per gallon of blackstrap molasses
- Development of a method for measurement of internal stress in brass tubing
- Dielectric constant, power factor and resistivity of rubber and gutta-percha
- Difference in weight between raw and clean wools
- Distribution of energy in the spectrum of an acetylene flame
- Distribution of energy in the visible spectrum of an acetylene flame
- Durability of sole leather filled with sulphite cellulose extract
- Dynamometer tests of automobile tires
- Earth resistance and its relation to electrolysis of underground structures
- Effect of certain pigments on linseed oil
- Effect of concentrated loads on the length of measuring tapes
- Effect of dry cleaning on silks : a comparison of the effect of dry cleaning and some service conditions on the strength of silk
- Effect of eddy currents in a core consisting of circular wires
- Effect of heat treatment on the mechanical properties of 1 per cent carbon steel
- Effect of hot-rolling conditions on the physical properties of a carbon steel
- Effect of imperfect dielectrics in the field of a radiotelegraphic antenna
- Effect of overfiring upon the structure of clays
- Effect of repeated reversals of stress on double-reinforced concrete beams
- Effect of solar radiation upon balloons
- Effect of temperature, deformation, and rate of loading on the tensile properties of low-carbon steel below the thermal critical range
- Effect of the size of grog in fire-clay bodies
- Effect of twist on the physical properties of a number 7s yarn
- Effects of oils, greases, and degree of tannage on the physical properties of russet harness leather
- Effusion method of determining gas density
- Electrodeposition of chromium from chromic acid baths
- Electrolysis testing
- Electrolytic corrosion of iron in soils
- Electrolytic resistance method for determining carbon in steel
- Embrittlement of malleable cast iron resulting from heat treatment
- Emissive tests of paints for decreasing or increasing heat radiation from surfaces
- Endurance tests of tires
- Establishment of radio standards of frequency by the use of a harmonic amplifier
- Experimental study of the relation between intermittent and nonintermittent sector-wheel photographic exposures
- Exposure tests on colorless waterproofing materials
- Extraction of rubber goods
- Failure of brass : 1.--Microstructure and initial stresses in wrought brasses of the type 60 per cent copper and 40 per cent zinc
- Filters for the reproduction of sunlight and daylight and the determination of color temperature
- Fire resistance of concrete columns
- Flow in a low-carbon steel at various temperatures
- Further experiments on the volatilization of platinum
- Further radiometric measurements and temperature estimates of the planet Mars, 1926
- Further tests of stellar radiometers and some measurements of planetary radiation
- Gases in metals ..
- Generator for audio currents of adjustable frequency with piezo-electric stabilization
- Glasses for protecting the eyes from injurious radiations
- Graphic comparison of screw thread pitches : showing the number of threads per inch and pitch in millimeters for both inch and millimeter systems
- Gravitational anisotropy in crystals
- Ground connections for electrical systems
- Handbook, Bureau of Standards
- High silicon structural steel
- High-frequency resistance of inductance coils
- Holding power of wood screws
- Indeterminateness of electrical charge
- Influence of frequency of alternating or infrequency reversed current of electrolytic corrosion
- Influence of phosphorus upon the microstructure and hardness of low-carbon, open-hearth steels
- Influence of quality of gas and other factors on the efficiency of gas-mantle lamps
- Infra-red transmission and refraction data on standard lens and prism material
- Instruments and methods used in radiometry, III, The photoelectric cell and other selective radiometers
- Intercrystalline brittleness of lead
- Interference methods for standardizing and testing precision gage blocks
- Interferometer measurements of the longer waves in the iron arc spectrum
- International system of electric and magnetic units / : by J.H. Dellinger
- Investigations on the platinum metals, VII, Arc spectra of the platinum metals (4500A-9000A)
- Ionization and resonance potentials for electrons in vapors of lead and calcium
- Latent heat of vaporization of ammonia
- Leakage of currents from electric railways
- Life testing of incandescent lamps at the Bureau of Standards
- Loading test of a hollow tile and reinforced concrete floor of Arlington Building, Washington, D.C.
- Luminous radiation from a black body and the mechanical equivalent of light
- Magnetic susceptibility and iron content of cast red brass
- Magnetic testing of straight rods in intense fields
- Malleability and metallography of nickel
- Manufacture and properties of steel plates containing zirconium and other elements
- Manufacture of lime
- Measurement and specification of the physical factors which determine the saturation of certain tints of yellow
- Measurement of electrical resistance and mechanical strength of storage-battery separators
- Measurement of plasticity of mortars and plasters
- Measurement of the color temperature of the more efficient artificial light sources by the method of rotary dispersion
- Measurement of the degree of sizing of paper
- Measurement of the index of refraction of glass at high temperatures
- Measurements of the thermal dilatation of glass at high temperatures
- Mechanical properties and resistance to corrosion of rolled light alloys of aluminum and magnesium with copper, with nickel, and with manganese
- Melting points of fire bricks
- Method for differentiating and estimating unbleached sulphite and sulphate pulps in paper
- Method for precision test of large capacity scales
- Methods of making electrolysis surveys
- Methods of measurement of properties of electrical insulating materials
- Methods, formulas, and tables for the calculation of antenna capacity
- Microstructural changes accompanying the annealing of cast bronze (Cu88, Sn10, Zn2)
- Notes on standard wave lengths spectrographs, and spectrum tubes
- Operation of the modulator tube in radio telephone sets
- Performance tests of a liquid laundry soap used with textile materials / : by F.R. McGowan ..., F.W. Smither, ... Charles W. Schoffstall, ... ; Bureau of Standards
- Permeability of rubber to gases
- Permeability of stone
- Photometry of the gas-filled lamp
- Photomicrography of paper fibers
- Physical testing of cotton yarns
- Pouring and pressure tests of concrete
- Power losses in automobile tires
- Practical application of the earth-current meter
- Practical spectrographic analysis
- Preparation of galactose
- Preparation of pure iron and iron-carbon alloys
- Present status of the determination of the constant of total radiation from a black body
- Principles of radio transmission and reception with antenna and coil aerials
- Properties and manufacture of concrete building units
- Properties of American bond clays and their use in graphite crucibles and glass pots
- Properties of Portland cement having a high magnesia content
- Properties of electrical insulating materials of the laminated phenolmethylene type
- Properties of some European plastic fire clays
- Properties of the calcium silicates and calcium aluminate occurring in normal Portland cement
- Protected thermoelements
- Psychrometric charts
- Pulp and paper fiber composition standards : reference standards, showing the color reactions of common paper-making fibers and standard fiber mixtures with various stains for use in identification and estimation of fiber composition of paper
- Radiators for aircraft engines
- Radio acoustic method of position finding in hydrographic surveys
- Radio-frequency amplifiers
- Radio-frequency resistance and inductance of coils used in broadcast reception
- Radiometric measurements on the carbon arc and other light sources used in phototherapy
- Rate of exhaustion of a closed tank by a reciprocating air pump
- Recent developments in lamp life-testing equipment and methods
- Recent modifications in the construction of platinum resistance thermometers
- Reclaimed rubber
- Reclamation of used petroleum lubricating oils
- Recovery of paraffin and paper stock from waste paraffin paper
- Redetermination of secondary standards of wave length from the new international iron arc
- Reflecting power of stellite and lacquered silver
- Relationships between the Rockwell and Brinell numbers
- Relative merits of cotton and jute cement sacks
- Relative sensibility of the average eye to light of different colors and some practical applications to radiation problems
- Relative usefulness of gases of different heating value and adjustments of burners for changes in heating value and specific gravity
- Release of internal stress in brass tubing
- Report of the ... National Conference on Weights and Measures
- Report to the International Committee on Electrical Units and Standards of a special technical committee appointed to investigate and report on the concrete standards of the international electrical units and to recommend a value for the Weston normal cell, January 1, 1912
- Resistance of an oil to emulsification
- Resistance of conductors of various types and sizes as windings of single-layer coils at 150 to 6,000 kilocycles
- Results of a survey of elevator interlocks and an analysis of elevator accident statistics
- Saturation relations in mixtures of sucrose, dextrose, and levulose
- Sensitivity and magnetic shielding tests of a Thomson galvanometer for use in radiometry
- Sensitometry of photographic emulsions and a survey of the characteristics of plates and films of American manufacture
- Series in the arc spectrum of molybdenum
- Shear tests of reinforced concrete beams
- Short tests for sets of laboratory weights
- Soil survey of the Garden City Area, Kansas
- Some effects of the distributed capacity between inductance coils and the ground
- Some foreign specifications for railway materials : rails, wheels, axles, tires
- Some leadless borosilicate glazes maturing at about 1100° C
- Some methods of testing radio receiving sets
- Some new thermoelectrical and actinoelectrical properties of molybdenite
- Some unusual features in the microstructure of wrought iron
- Soundproofing of apartment houses
- Spark photography and its application to some problems in ballistics
- Specific heat of superheated ammonia vapor
- Specific volume of liquid ammonia
- Specific volume of saturated ammonia vapor
- Spectral energy distribution of the light emitted by plants and animals
- Spectral photoelectric sensitivity of silver sulphide and several other substances
- Spectrophoto-electrical sensitivity of bournonite and pyrargyrite
- Spectrophoto-electrical sensitivity of some halide salts of thallium, lead, and silver
- Spectrophotoelectrial sensitivity of argentite (Ag2S)
- Spectroradiometric analysis of radio signals
- Spherical aberration in thin lenses
- Standardization of automobile tire fabric testing
- Standards and specifications for nonmetallic minerals and their products
- Statical hysteresis in the flexure of bars
- Steel rails from sink-head and ordinary rail ingots
- Strength of steel tubing under combined column and transverse loading, including tests of columns and beams
- Structure of martensitic carbon steels and changes in the microstructure which occur upon tempering
- Studies of instruments for measuring radiant energy in absolute value : an absolute thermopile / by W.W. Coblentz and W.B. Emerson
- Studies on paper pulps
- Supplement to report to the International Committee on Electrical Units and Standards of a special technical committee appointed to investigate and report on the concrete standards of the international electrical units and to recommend a value for the Weston normal cell
- Surface insulation of pipes as a means of preventing electrolysis
- System for measuring optical waveguide intensity profiles
- Tables for the calculation of the mutual inductance of circuits with circular symmetry about a common axis
- Tangent modulus and the strength of steel columns in tests
- Tarnish resisting silver alloys
- Technical control of the colloidal matter of clays
- Technical news bulletin
- Technologic papers of the Bureau of Standards
- Temperature estimates of the planet Mars
- Tensile properties of some structural alloy steels at high temperatures
- Tentative standard test methods and percentages of oil and moisture in hair press cloths
- Test of a hollow tile and concrete floor slab reinforced in two directions
- Tests of bond resistance between concrete and steel
- Tests of caustic magnesia made from magnesite from several sources
- Tests of heavily reinforced concrete slab beams : effect of direction of reinforcement on strength and deformation
- Tests of hollow tile and concrete slabs reinforced in one direction
- Tests of stellar radiometers and measurements of the energy distribution in the spectra of 16 stars
- The National Conference on Weights and Measures : its organization and procedure
- The Redwood viscometer
- The determination of chromium : and its separation from vanadium in steels
- The effect of preliminary heating treatment upon the drying of clays
- The field radiated from two horizontal coils
- The function of time in the vitrification of clays
- The latent heat of pressure variation of liquid ammonia
- The nick-bend test for wrought iron
- The preparation of levulose
- The production of liquid air on a laboratory scale
- The radio direction finder and its application to navigation
- The saccharimetric normal weight and specific rotation of dextrose
- The solubility of dextrose in water
- The spectral distribution of energy required to evoke the gray sensation
- The strength of reinforced concrete beams : results of tests of 333 beams, (first series)
- The structure of fucose
- The theory of determination of ultra-radio frequencies by standing waves on wires
- Theory and interpretation of experiments on the transmission of sound through partition walls
- Theory and performance of rectifiers
- Thermal expansion of alloys of the "stainless iron" type
- Thermal expansion of alpha and of beta brass between 0 and 600 CÌŠ : in relation to the mechanical properties of heterogeneaous brasses of the Muntz metal type
- Thermal expansion of aluminum and various important aluminum alloys
- Thermal expansion of beryllium and aluminum-beryllium alloys
- Thermal expansion of copper and some of its important industrial alloys
- Thermal expansion of graphite
- Thermal expansion of molybdenum
- Thermal expansion of tungsten
- Thermal stresses in chilled iron car wheels
- Thermal stresses in steel car wheels
- Thermal-conductivity method for the analysis of gases
- Toluol recovery
- Transmission and absorption of sound by some building materials
- Transmission of sound through building materials
- Transmission of sound through voice tubes
- Transmissive properties of eye-protective glasses and other substances
- Typical cases of the deterioration of Muntz metal (60:40 brass) by selective corrosion
- Ultra-violet and visible transmission of eye-protective glasses
- Ultra-violet reflecting power of some metals and sulphides
- Units used to express the wave lengths of electromagnetic waves
- Unusual features in the microstructure of ferrite
- Use of glue in coated paper
- Use of sodium salts in the purification of clays and in the casting process
- Use of the Ulbricht sphere in measuring reflection and transmission factors
- Vapor pressure of ammonia
- Various photo-electrical investigations
- Viscosity of gasoline
- Viscosity of porcelain bodies
- Wave length measurements in the arc spectra of gadolinium and dysprosium
- Wave length measurements in the arc spectra of neodymium and samarium
- Wave lengths of the stronger lines in the helium spectrum
- Wave-length measurements in the arc and spark spectra of zirconium
- Wave-length measurements in the arc spectrum of scandium
- Weighing by substitution
- Wet-process enamels for cast iron
- Wheatstone bridges and some accessory apparatus for resistance thermometry
- Wind pressures on structures
- Zinc cyanide plating solutions
Author of
Issuing body of
- A flow calorimeter for specific heats of gases
- A picnometer for the determination of density of molasses
- A review of the literature relating to the critical constants of various gases
- Cause and prevention of kiln and dry-house scum and of efflorescence on face-brick walls
- Comparative tests of stitches and seams
- Difference in weight between raw and clean wools
- Graphic comparison of screw thread pitches : showing the number of threads per inch and pitch in millimeters for both inch and millimeter systems
- Intercrystalline brittleness of lead
- Latent heat of vaporization of ammonia
- Microstructural changes accompanying the annealing of cast bronze (Cu88, Sn10, Zn2)
- Operation of the modulator tube in radio telephone sets
- Physical testing of cotton yarns
- Psychrometric charts
- Results of a survey of elevator interlocks and an analysis of elevator accident statistics
- Short tests for sets of laboratory weights
- Some unusual features in the microstructure of wrought iron
- Specific heat of superheated ammonia vapor
- Standardization of automobile tire fabric testing
- Structure of martensitic carbon steels and changes in the microstructure which occur upon tempering
- The National Conference on Weights and Measures : its organization and procedure
- The latent heat of pressure variation of liquid ammonia
- The nick-bend test for wrought iron
- Thermal-conductivity method for the analysis of gases
- Typical cases of the deterioration of Muntz metal (60:40 brass) by selective corrosion
- Unusual features in the microstructure of ferrite
Embed (Experimental)
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.in.gov/resource/3tLxClRmeaI/" typeof="Organization http://bibfra.me/vocab/lite/Organization"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.in.gov/resource/3tLxClRmeaI/">United States, Bureau of Standards</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.in.gov/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.in.gov/">Indiana State Library</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the Organization United States, Bureau of Standards
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.in.gov/resource/3tLxClRmeaI/" typeof="Organization http://bibfra.me/vocab/lite/Organization"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.in.gov/resource/3tLxClRmeaI/">United States, Bureau of Standards</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.in.gov/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.in.gov/">Indiana State Library</a></span></span></span></span></div>
